Feed Pellet Line quotation Chicken Feed Pellet Production Line - Raw Material Receiving 1. Receipt of raw materials: When transported by bulk truck or train, the raw materials are weighed by a dump truck with a floor scale and then unloaded to the unloading pit. 2. Receiving of packaging materials: divided into manual handling and mechanical receiving. 3. Receipt of liquid raw materials: bottles and cartridges can be directly transported and stored manually. Storage of raw materials There are many raw materials and materials in the feed, and various types of silos must be used. There are two types of feed mills: silos and house silos. The main raw materials, such as corn, high grain and other cereal raw materials, have good fluidity and are not easy to agglomerate. Most of them are stored in silos, and powdery raw materials such as bran and soybean meal have poor dispersibility and are easy to agglomerate after a period of storage. The unloaded material is stored in a room warehouse. Cleaning of raw materials The cleaning equipment of the feed factory is mainly screening and magnetic separation equipment. The screening equipment removes large and long debris such as stones, soil, and sack fragments in the raw materials. Magnetic separation equipment is mainly to remove iron impurities. Crushing of raw materials Feed crushing in Chicken Feed Pellet Production Line is determined according to the required particle size, feed variety and other conditions. According to the amount of raw material crushing, it can be divided into primary crushing process, circulating crushing process or secondary crushing process. Combined with the batching process, it can be divided into the first batching and then crushing process and the first crushing and then batching process. 1. Two or more pulverizers are used in parallel. The disadvantage is that the particle size is not uniform and the power consumption is large. 2. The secondary crushing process has three process forms: single-cycle crushing process, stage crushing process and tissue powder process. (1) The single-cycle secondary crushing process is to use the crusher to crush and screen the material, and then return the screened material to the original crusher to be crushed again. (2) Segmented secondary crushing process. The basic setup of the process is to use two crushers with different screens. Each crusher is equipped with a grading screen, and the material is first screened through the first-level screen to meet the particle size requirements. The material directly enters the mixer, the screened material enters the first-stage pulverizer, and the pulverized material enters the grading screen for screening. The materials that meet the particle size requirements enter the mixer, and the remaining sieves enter the secondary pulverizer, and then enter the mixer after pulverization. (3) Combined secondary crushing process. The process uses different types of pulverizers in the two pulverizations. First use of a two-roll mill. After grading and sieving, the lower sieve enters the mixer. The material enters the hammer mill for secondary crushing. 3. Ingredients first, then crushing process. According to the design of the feed formula, the ingredients are mixed and mixed first, and then enter the crusher for crushing. 4. The process of first crushing and then batching, the first crushed powder enters the batching bin respectively, and then the ingredients are mixed.Feed Pellet Line quotation website:http://www.feed-granulators.com/feed-pellet-line/